New machinery must be designed and constructed in such a way as to prevent risks of contact which could lead to accidents. Machinery must, where risks persist, be fitted with guards or protective...
· PDF 文件machinery and equipment of improved design, risk controls must be applied to the hazards to prevent or reduce the risk (chance) of injury or harm. Workplace health and safety laws require the highest order control be applied. Higher order machinery and equipment risk controls are …
13/9/2017 · A thorough hazard identifi ion process needs to consider the effect environmental factors (such as lighting, heat, and cold) have on workers when using machinery. 3.9.1 Working at height. People need a suitable work platform to reduce the risk of falling from machinery. Working safely at height may need: fixed or permanently installed access platformsSafe use of tractors - guidelines | WorkSafe5/9/2017Approved Code of Practice for Safety and Health in Forest ...1/6/2010Equipment for working at height | WorkSafe Safely using computers at work | WorkSafe 查看更多结果
Such equipment must have been subject to appropriate conformity assessment, labelled and accompanied by a Declaration of Conformity (DoC) before being placed on the market or …
23/12/2012 · 1. Never remove or try to defeat machine safeguards. 2. Don’t create new hazards, such as allowing objects to fall into the moving parts or by creating a new pinch point. 3. Report problems with machine safeguards to your supervisor immediately. 4.预计阅读时间：3 分钟
19/4/2011 · All employees working around moving machinery are prohibited from wearing loose clothing or loose jewelry. All employees working around moving machinery must have long hair tied back where it can not fall forward or be caught in the machinery.评论数: 12
Always use a guard when working on a machine. 12. Keep hands away from moving/rotating machinery. 13. Use hand tools carefully, keeping both hands behind the cutting edge. 14. Report any damage to machines/equipment as this could cause an accident.
Hazards associated with working near or on machinery vary depending on the exact machine used but can include exposure to: moving parts (e.g., risk of injuries from entanglement, friction, abrasion, cutting, severing, shearing, stabbing, puncturing, impact, crushing, drawing-in or trapping, etc.)
20/11/2014 · These machines are highly technical, and each one has its own quirks and attributes. You must understand your equipment before you even put your hands on the controls, otherwise disasters are bound to happen. Inspect your machines – Each machine has thousands of moving parts or more, and each needs to be in peak condition before it can do the job.
Rule no. 2. Treat all electrical devices as if they are live or energized. You never know. Rule no. 3. Disconnect the power source before servicing or repairing electrical equipment. The only way to be sure. Rule no. 4. Use only tools and equipment with non-conducting handles when working on electrical devices. Easy to check. Rule no. 5